Features
1. Produced by high-frequency inverter technology, stable high-voltage output can get good image quality;
2. A compact design, easy to carry and work in different regions and locations;
3. There are three exposure control methods: remote control, hand brake and interface buttons;
4. Fault self-diagnosis and self-protection;
5. With a flexible digital interface, users can go deep into the core programming control and can adapt to different DR detectors.
6. You can choose push-button or touch screen
Technical Specification
|
PARAMETER |
SPECIFICATION |
|
Maximum power |
5KW |
|
Photography KV range |
40-50KV、40-60KV、40-80KV、40-100KV、40-110KV |
|
Photography mA range |
100mA、80mA、63mA、50mA、32mA |
|
mAs range |
0.32-315 mAs |
|
Exposure time range |
0.01-6.3s |
|
Working frequency |
≥30 kHz |
|
Input power type |
220V±10%, 50Hz/60Hz |
|
Host size |
37（L）×26（W）×23（H）cm |
|
Weight |
21KG |
|
Inverter method |
PWM（Pulse width modulation） |
Standard Configure
Flat panel detector+ Image workstation+ Trolley
Flat panel detector
Detector category: amorphous silicon
Scintillator CsI
Image size 35×43 cm
Pixel matrix: 2560×3072
Pixel pitch 140 μm
A/D conversion 16 Bit
Spatial resolution 3.6
LP/mm drawing time: 2S
Battery standby time: 10 H
Image workstation
Screen size 14.1/15.6
Processor Core Quad
Core
Memory 4G
Hard disk 500G
Graphics card
Trolley
Net weight 70KG
Maximum height: 200cm
Width 66cm
Adjust 50~200cm
